Inside Our Factory: The Maker Behind Your Medical Wipes

Our production base covers close to 10,000 square meters. At its center is a 5,000 m² GMP Class 100,000 cleanroom, the same grade hospitals require for sterile supplies. Air passes through multi-stage filtration. People and materials move through separate routes, and HEPA filters keep the environment under constant monitoring. Fifteen fully automated high-speed lines run at the same time without cross-contamination between batches.

Many suppliers outsource sterilization or skip it. We own four: gamma and electron-beam irradiation down to a sterility assurance level of 10⁻⁶, ethylene oxide (EO) at low temperature so fibers stay intact, high-temperature steam at 450°C with UV, and quaternary ammonium treatment for an antibacterial effect that lasts beyond 365 days. Because the lines are ours, every batch gets tested rather than hoped for.

China's national limit for bacterial count in this category is 600 CFU/g. Our internal control holds it under 5 CFU/g, roughly 120 times tighter. We keep three tiers on purpose: the national standard (under 600), our enterprise standard (under 200), and our internal limit (under 5). When a sheet touches a surgical hand, a newborn, or a post-op face, "good enough" has no place in the room.

We hold ISO 9001 and ISO 14001, CE marking for the EU, FDA food-contact certification, and EU AP approval. The site carries GMP cleanroom qualification, both disinfection (Disinfection Product Number) and medical-device (Medical Device Registration Number) production licenses, and Class I medical device manufacturing status. We are also a nationally recognized high-tech enterprise, with 18 patents, 2 invention patents pending, 13 trademarks, and 9 enterprise standards.

In 2020 we opened a joint lab with Qilu Hospital of Shandong University. That link keeps our R&D anchored to real hospital needs: low-lint structures, higher wet strength, biodegradable options. Two in-house technologies came out of it, the 5C clean process and the crystal-embossing method.

Over 300 Grade III hospitals in China buy from us. More than 1,500 partners work with us across distribution, OEM, and private label. Our products ship to 80-plus countries. Overseas buyers often say the same thing: factory-direct supply plus the ability to audit the plant is what let them switch from imported brands at a fraction of the cost.